FRANÇAIS
Vous pouvez suivre l'avancer de mes projets et écouter les enceintes ici
https://linktr.ee/Rench2010
Enceinte bass reflex omnidirectionnel, basé sur 1 haut parleur large bande et un tweeter a dome souple. L'enceinte est conçu pour être utiliser au sol, ou sur un bureau. C'est pour cela que j'ai décider de faire rayonner le tweeter vers le plafond plutôt que vers le sol comme on peut le voir sur d'autre enceinte omnidirectionnel.
Tous ceci en essayant d'avoir un design sortant de l'ordinaire
Dimensions: 28,6 x 56,8 cm
Cette configuration nécessite une correction actif soit:
- Solution économique : via PC et RME Digiface USB accompagner de 2x SMSL AD18 (ou autre amplis Integer et FDA):
https://www.thomann.de/fr/rme_digiface_usb.htm
https://www.audiophonics.fr/fr/amplificateurs-full-digital-fda/smsl-ad18-v31-amplificateur-fda-bluetooth-nfc-tas5342a-2x-70w-sortie-subwoofer-4-ohm-p-11498.html
-Solution Portatif : via 2 Fusioamp 2 voies ou 3 voies (ajout subwoofer) loger à part de l'enceinte
https://www.audiophonics.fr/fr/modules-amplificateurs/hypex-fusionamp-fa122-module-amplificateur-ncore-2x125w-dsp-adau1450-dac-ak4454-192khz-p-13530.html
https://www.audiophonics.fr/fr/modules-amplificateurs/hypex-fusionamp-fa123-module-amplificateur-ncore-2x125w-100w-dsp-adau1450-dac-ak4454-192khz-p-13531.html
Pour les débutants vous pouvez utiliser un logiciel comme un égaliseur a bande qui vous permettra d'égaliser l'enceinte selon vos preference à l'oreille en quelques minutes.
Pour une correction avancer l'utilisation d'un micro de mesure comme le UMIK-1 ou UMIK-2:
https://www.minidsp.com/products/acoustic-measurement/umik-1
https://www.minidsp.com/products/acoustic-measurement/umik-2
Si vous n'avez pas d'imprimante 3D vous pouvez utiliser cette imprimante, qui à été utilisé pour fabriquer cette paire d'enceintes:
https://eu.store.bambulab.com/fr-fr/products/a1?variant=47554015691100&gad_source=1
Les pieces on été découper avec le logiciel Orca Slicer:
https://github.com/SoftFever/OrcaSlicer/releases/download/v2.1.1/OrcaSlicer_Windows_Installer_V2.1.1.exe
Vous trouverez dans les fichier fournis, le projet en .3mf ou tous est préconfigurer pour une imprimante BambuLab A1
! Lire les instruction avant afin de prévoir le matériel à utiliser !
IMPRESSION ET COLLAGE DES ELEMENTS
Pour ce qui est du Filament (10kg pour la paire), je vous conseil les filaments recyclé (PETG, PLA, ABS) de chez ariane plast qui vous coûterons entre 100 et 160€ les 10kg
https://www.arianeplast.com/58-3d-filament-recycle
1/ Imprimer les différentes partis. (imprimer 1 seul event et changer le si besoin lors de la correction des enceintes)
2/ Une fois les pièces imprimer, découper et placer sur les parois et les renfort interne, le bitume de 5 mm qu'il faudra préchauffer pour une meilleure adhérence:
https://www.audiophonics.fr/fr/amortissants/pinta-amortson-bi10a-phd-amortissant-bitume-auto-adhesif-400x500mm-p-5408.html
3/ Coller les 4 gros bloc ensemble (des emplacement pour des aimants de 9 x 2 mm sont prévu pour vous aider à centrer les pièces sur le bambu.3mf)
https://amzn.eu/d/064ddSz
3/ Coller les 2 partis du bornier arrière via la colle forte puis utiliser le mastic fibre de verre pour renforcer la liaison
https://amzn.eu/d/2n9BmCG
https://www.peinturevoiture.fr/2138-mastic-fibre-verre-ecar-ep340.html
4/ Percer les trou de fixation des haut parleur SPH60X en vous aidant des trou de fixation des haut parleur
https://amzn.eu/d/8tChUgN
le tweeter sera pris en sandwich entre les partis imprimées et les joints
POST-TRAITEMENT ET PEINTURE
5/ Post traiter les pièces imprimer via des produit comme:
- papier abrasif:
https://amzn.eu/d/1fWJFOc
- le mastic fibre de verre pour combler les différentes fuite au niveau des liaison :https://www.peinturevoiture.fr/2138-mastic-fibre-verre-ecar-ep340.html
et les spatules
https://www.peinturevoiture.fr/1372-spatule-mastic-inox.html
- Mastic très fin ou bombe garnissant pour combler les stries d'impressionhttps://www.peinturevoiture.fr/4852-mastic-tres-fin-upol-extra-gold.htmlouhttps://www.peinturevoiture.fr/2328-appret-bombe-ecar-gris-moyen-400ml.html
6/ Appliqué votre peinture sur les différents éléments ( vous pourrez vous aidez de ruban de masquage)
https://amzn.eu/d/9zbQHgW
HAUT PARLEUR, FIXATION, BORNIER
7/ Découper et coller les joints en vous aidant des pièce imprimer
https://amzn.eu/d/3EbyAPS
8/ Placer un joint sous le "diffuseur LB" (la version renforcer ou normal celons vos goûts) et visser le sph60x de sorte à ce qu'il pince le joint
https://amzn.eu/d/cB98TV5
9/ Câblé le SPH60X ( un espace pour laisser passer le cable est prévu dans le haut du "chassis" ( prendre une bonne longueur pour les faires passer jusqu'au bornier)
https://www.thomann.de/fr/monacor_sph60x.htm
câbles:
https://www.son-video.com/article/cables-d-enceintes/norstone/b250-classic-black-2-x-2-5-mm2-5-m
ou
https://www.son-video.com/article/accessoires-cables-audio-cables-d-enceintes/atohm/zef-mini-1-m
exemple d'étain:
https://www.audiophonics.fr/fr/etain-a-souder/wbt-0800-etain-a-souder-soudure-argent-4-42g-p-5331.html
10/ Placer un joints sur la parti haute du "diffuseur LB" qui accueillera le tweeter
https://amzn.eu/d/cB98TV5
11/ Connecter le tweeter Audax TW025A1 à ses cables et passer les dans le conduit prévu à cet effet dans le "diffuseur LB" ( prendre une bonne longueur pour les faire passer jusqu'au bornier)
https://www.toutlehautparleur.com/tweeter-a-dome-audax-tw025a1-ferrofluide-8-ohm-bobine-25-mm-facade-100-mm.html
exemple d'étain:
https://www.audiophonics.fr/fr/etain-a-souder/wbt-0800-etain-a-souder-soudure-argent-4-42g-p-5331.html
12/ Placer un autre joint sur le dessus du tweeter
https://amzn.eu/d/cB98TV5
13/ Positionner le "diffuseur tweeter" (la version renforcer ou normal celons vos goûts) au-dessus du tout et visser le à la parti haute du "diffuseur LB", de sorte à ce que le tweeter soit pris en sandwich entre le "diffuseur LB" et le "diffuseur tweeter"
14/ Positionner l'amortissem*nt dans l'enceinte. étant donner que ce sont des large bande un amortissem*nt trop important étoufferais le son
je recommande donc de placer uniquement 1 feuille de ouate derrière chaque haut parleur seulement
https://www.toutlehautparleur.com/accessoires-enceintes-electro-acoustiques/amortissem*nt-acoustique/lot-de-deux-laines-d-amortissem*nt-synthetique-tlhp-60x33x3cm-chacune-290gr-m2.html
15/ Placer un joint sur le dessus du "chassis"
https://amzn.eu/d/cB98TV5
16/ Visser le bloc "diffuseur LB et tweeter" sur le chassis de sorte à ce qu'il pince le joint du chassis
17/ Faite sortir les cables des 2 haut parleur par les trous du bornier
18/ coller les 3 partie du bornier arrière ensemble ( logo + axe principal + habillage bas )
https://amzn.eu/d/2n9BmCG
19/ coller la base des "connecteurs bannane" sur le bornier imprimer
https://amzn.eu/d/6ulLHVc
20/ connecter les câble au bornier via la vis de serrage.
21/ coller à la colle forte l'ensemble du bornier au dos de l'enceinte.
https://amzn.eu/d/6ulLHVc
PIEDS
22/ découper et placer un joint à la base de l'évent (il assurera l'étanchéité de l'enceinte)
https://amzn.eu/d/3EbyAPS
23/ sous l'enceinte placer un l'event évents puis le pieds.
24/ En vissant le pieds vous prendrez en sandwich l'event et le joint qui lui est associer.
https://amzn.eu/d/deCkw8K
Pour les vis permettant de fixer le bornier ou les event vous prouvez au préalable passer un coup de bombe de peinture leger afin qu'il s'accorde mieux avec les elements.
Vous devriez en avoir fini avec la parti matériel
Pour la parti informatique et paramétrage je vous laisse me contacter ou bien me suivre sur mes reseaux.
ENGLISH:
You can follow the progress of my projects and listen to the speakers here:
https://linktr.ee/Rench2010
Omnidirectional bass reflex speaker, based on 1 full-range speaker and a soft dome tweeter. The speaker is designed to be used on the floor or on a desk. That's why I decided to have the tweeter radiate towards the ceiling rather than the floor, as seen in other omnidirectional speakers.
All of this while trying to have a design that stands out.
Dimensions: 28.6 x 56.8 cm
This configuration requires active correction, either:
- Budget-friendly solution: via PC and RME Digiface USB along with 2x SMSL AD18 (or other Integer and FDA amplifiers):
https://www.thomann.de/fr/rme_digiface_usb.htm
https://www.audiophonics.fr/fr/amplificateurs-full-digital-fda/smsl-ad18-v31-amplificateur-fda-bluetooth-nfc-tas5342a-2x-70w-sortie-subwoofer-4-ohm-p-11498.html
- Portable solution: via 2-way or 3-way FusionAmp (with optional subwoofer) housed separately from the speaker:https://www.audiophonics.fr/fr/modules-amplificateurs/hypex-fusionamp-fa122-module-amplificateur-ncore-2x125w-dsp-adau1450-dac-ak4454-192khz-p-13530.htmlhttps://www.audiophonics.fr/fr/modules-amplificateurs/hypex-fusionamp-fa123-module-amplificateur-ncore-2x125w-100w-dsp-adau1450-dac-ak4454-192khz-p-13531.html
For beginners, you can use a simple band equalizer software to adjust the speaker’s sound to your preference by ear in a few minutes. For advanced correction, use a measurement microphone such as UMIK-1 or UMIK-2:
https://www.minidsp.com/products/acoustic-measurement/umik-1
https://www.minidsp.com/products/acoustic-measurement/umik-2
If you don’t have a 3D printer, you can use this printer, which was used to create this pair of speakers:
https://eu.store.bambulab.com/fr-fr/products/a1?variant=47554015691100&gad_source=1
The parts were sliced using the Orca Slicer software:
https://github.com/SoftFever/OrcaSlicer/releases/download/v2.1.1/OrcaSlicer_Windows_Installer_V2.1.1.exe
Included in the provided files is the project in .3mf format, preconfigured for a BambuLab A1 printer.
! Read the instructions first to prepare the necessary materials!
PRINTING AND ASSEMBLING ELEMENTS
As for the filament (10 kg for the pair), I recommend the recycled filaments (PETG, PLA, ABS) from Ariane Plast, which will cost you between €100 and €160 for 10 kg.
https://www.arianeplast.com/58-3d-filament-recycle
1/ Print the different parts. (Print only one vent, and swap it if needed during the speaker correction process).
2/ After printing, cut and place 5 mm self-adhesive bitumen on the walls and internal reinforcements, preheating it for better adhesion:
https://www.audiophonics.fr/fr/amortissants/pinta-amortson-bi10a-phd-amortissant-bitume-auto-adhesif-400x500mm-p-5408.html
3/ Glue the 4 large blocks together (magnet slots for 9 x 2 mm magnets are provided to help align the parts in the bambu.3mf):
https://amzn.eu/d/064ddSz
3/ Glue the 2 parts of the rear terminal with strong glue, then use fiberglass putty to reinforce the joint:
https://amzn.eu/d/2n9BmCG
https://www.peinturevoiture.fr/2138-mastic-fibre-verre-ecar-ep340.html
4/ Drill the mounting holes for the SPH60X speaker using the speaker’s mounting holes as a guide:
https://amzn.eu/d/8tChUgN
The tweeter will be sandwiched between the printed parts and the seals.
POST-PROCESSING AND PAINTING
5/ Post-process the printed parts using:
Sandpaper:
https://amzn.eu/d/1fWJFOc
Fiberglass putty to fill in gaps at the joints:
https://www.peinturevoiture.fr/2138-mastic-fibre-verre-ecar-ep340.html
and spatulas:
https://www.peinturevoiture.fr/1372-spatule-mastic-inox.html
Fine putty or filler spray to fill in print lines:
https://www.peinturevoiture.fr/4852-mastic-tres-fin-upol-extra-gold.html
or
https://www.peinturevoiture.fr/2328-appret-bombe-ecar-gris-moyen-400ml.html
6/ Apply your paint to the various elements (masking tape can help):
https://amzn.eu/d/9zbQHgW
SPEAKERS, MOUNTING, TERMINAL BLOCK
7/ Cut and glue the seals using the printed parts:
https://amzn.eu/d/3EbyAPS
https://amzn.eu/d/7FKZ7an
https://amzn.eu/d/gxOombh
8/ Place a seal under the “LB diffuser” (reinforced or standard version based on your preference) and screw the SPH60X in a way that pinches the seal:
https://amzn.eu/d/cB98TV5
9/ Wire the SPH60X (space is provided in the top of the “chassis” for cable routing; allow enough length for the cables to reach the terminal):
https://www.thomann.de/fr/monacor_sph60x.htm
Cables:
https://amzn.eu/d/1lkiFi2
10/ Optional: if you're using a removable terminal block:
https://amzn.eu/d/69SzvZm
Assemble the terminal and thread the cable through the back plate, leaving enough slack to reach the inside of the speaker.
DAMPING
11/ Once everything is assembled, you can adjust the damping based on your preference and room acoustics. For this, I recommend experimenting with different damping materials and configurations to find what works best for your environment.
FINISHED!
Note: I'm available to help you with calibration, setup, and any questions you may have about this project. You can reach out to me through the contact link provided earlier in this guide.
Good luck, and enjoy your sound experience!